Controlling VSPDL Operation

Use the following commands to start the VSPDL:

#/etc/rc.d/init.d/vspm start (must report [OK] if started successfully).
#/etc/rc.d/init.d/vspd start.

As explained in how VSP works , the VSPLD configuration is stored in the configuration file vspd.conf . After the file is edited and changes saved you must "update" driver configuration by using the following command:

/etc/rc.d/init.d/vspd reloadconf

This will make the VSPDL re-read the file and start using new configuration. Configuration can be updated even when the VSPDL is working i.e. some VSPs are opened and in use.