Application-to-DS Link

This job is selected by choosing configure a Device Server for direct communications with an application on this PC from the list of available jobs .

When performing this job the Connection Wizard configures the DS of your choice to work with the "network" software application* on this PC. Use this job if you want to make your PC application communicate directly with the DS and the serial device behind it.

When working on this job the Wizard can only setup the DS side of the link. It is your responsibility to setup the software as needed (expected by the Wizard ).

* I.e. an application that is capable of communications through the TCP/IP networks. If your application can only communicate through COM ports use the VSP-to-DS connection instead.