PPPoE Login Password (PD) setting [V3.54+]


(see setting description format info here)

Function:Defines login password for PPPoE Access Concentrator
Set (S) command format:SPDpp...p, where pp...p is login password (0-20 characters long)
Get (G) command format:GPD
Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization
Post-initialization value:<NULL>
Change takes effect:After reboot
Overriding parameter:---
Relevance conditions:PPPoE Mode (PP) setting= 1 (on connection) or 2 (on powerup)
First introduced:V3.54
See also:PPPoE


This setting defines login password for PPPoE Access Concentrator. Login name can be up to 20 characters long.

This setting is irrelevant when PPPoE Mode (PP) setting is 0 (disabled).

Notice that PPPoE is only available in firmware V3.54+ . This means that first-generation Devices (EM100-00/ -01/ -02, DS100-00/ -01/ -02) do not support PPPoE.