Serial Settings

Serial settings define operation of the serial port of the DS. For more information see serial port and serial communications .

The following settings belong to this group:

Setting	Description
Serial Interface (SI) setting	Selects full-duplex or half-duplex mode for the serial port of the DS
Flow Control (FC) setting	Enables or disables hardware (RTS/CTS) flow control for the serial port of the DS
DTR Mode (DT) setting	Defines the function of the DTR line of the serial port of the DS
DTR Startup Mode (DS) setting [V3.27/V3.57+]	Defines the startup mode of the DTR line (High or Low)
Baudrate (BR) setting	Defines the baudrate of the serial port of the DS
Parity (PR) setting	Defines the parity mode of the serial port of the DS
Bits Per Byte (BB) setting	Defines the bits/byte mode of the serial port of the DS
Soft Entry (SE) setting	Disables or enabled serial programming mode entry through escape sequence and selects escape sequence type
Escape Character (EC) setting [V3.24/3.54+]	Defines ASCII code of character used in escape sequence
On-the-fly Commands (RC) setting	Enables or disables on-the-fly command processing by the DS
On-the-fly Password (OP) setting	Enables or disables password protection for on-the-fly commands
Notification Bitmask (NB) setting	Defines which I/O lines of the DS are monitored for changes