Buzz (B) command
Description
(see command description format info here)
| Function: | Makes the status LEDs of the DS play a recognizable pattern |
| Can be issued through: | Network (broadcasts ignored*, login not required) |
| Command format: | B |
| Possible replies: | A |
| First introduced: | Earlier than "baseline" V3.14/V3.51 |
| See also: | Status LED signals |
Details
Buzz command , when received by the DS, makes the device "play" a recognizable fast-blinking pattern on its status LEDs . This can be used to match an IP-address to a physical DS.
* Without prior selection using Select In Broadcast Mode (W) command.