Parity (PR) parameter
(see parameter description format info here)
|Function:||Overrides Parity (PR) setting|
|Parameter (P) cmd format:||PPRx, where x: 0 (off), 1 (even), 2 (odd), 3 (mark), 4 (space)|
|Possible replies:||A, C, D, R|
|First introduced:||Earlier than "baseline" V3.14/V3.51|
|See also:||Serial port and serial communications|
Parity parameter overrides the Parity (PR) setting .
Error (C) reply code is returned if the data supplied in the command is invalid. Denied (D) reply code is returned if:
|•||On-the-fly Commands (RC) setting is 0 (disabled).|
|•||If no password or incorrect password is supplied while the On-the-fly Password (OP) setting is 1 (enabled) and the password is set (value of the Password (PW) setting is not <NULL>).|
Rejected (R) reply code is returned if this command is sent while the DS is in the serial programming mode .