Connection Settings
Connection settings define how and in which fashion the DS establishes connections to and accepts connections from other hosts. For more information see Ethernet port and network communications .
The following settings belong to this group:
Setting |
Description |
Defines connection timeout (in minutes) |
|
Defines whether UDP or TCP protocol will be used for data connections |
|
Defines whether DS will accept or reject broadcast UDP datagrams |
|
Link Service Login (TL) setting [V3.24/3.54+] |
Enables/disables Link Service login procedure after a TCP data connection is established |
Defines whether inband command passing is enabled or disabled |
|
Enables or disables command-phase TCP programming |
|
Defines whether incoming and/or outgoing data connections are allowed |
|
Source IP Filtering (SF) setting [V3.24/3.54+] |
Defines whether the DS will accept incoming data connections from any network host or specific host only |
Defines conditions under which the DS will attempt to establish an outgoing connection to the remote host |
|
Defines the IP-address of the destination network host to which the DS will attempt to connect to (by default) |
|
Defines the port on the destination network host to which the DS will attempt to connect to (by default) |
|
Defines which UDP port the DS will send I/O line status change notifications to |