Bits Per Byte (BB) parameter


(see parameter description format info here)

Function:Overrides Bits Per Byte (BB) setting
Parameter (P) cmd format:PBBx, where x: 0 (7 bits), 1 (8 bits)
Possible replies:A, C, D, R
Relevance conditions:---
First introduced:Earlier than "baseline" V3.14/V3.51
See also:Serial port and serial communications


Bits Per Byte parameter overrides the Bits Per Byte (BB) setting .

Error (C) reply code is returned if the data supplied in the command is invalid. Denied (D) reply code is returned if:

On-the-fly Commands (RC) setting is 0 (disabled).
If no password or incorrect password is supplied while the On-the-fly Password (OP) setting is 1 (enabled) and the password is set (value of the Password (PW) setting is not <NULL>).

Rejected (R) reply code is returned if this command is sent while the DS is in the serial programming mode .