Inband Commands (IB) setting


(see setting description format info here)

Function:Enables or disables inband (TCP) programming
Set (S) command format:SIBx, where x: 0 (disabled), 1 (enabled)
Get (G) command format:GIB
Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization
Post-initialization value:0 (disabled)
Change takes effect:After reboot
Overriding parameter:---
Relevance conditions:Current Transport Protocol (TP) [setting/ parameter]= 1 (TCP) AND

        current Link Service Login (TL) [setting /parameter ] = 0 (disabled)

First introduced:Earlier than "baseline" V3.14/V3.51
See also:Inband (TCP) commands


Inband Commands setting defines whether inband (TCP) programming is enabled or disabled.

This Setting is irrelevant when the current Transport Protocol (TP) [setting / parameter ] is 0 (UDP) because inband command passing is only possible when TCP/IP is used for data connections between the network host and the DS.

Inband Commands setting is also irrelevant when current Link Service Login (TL) [setting /parameter ] = 1 (enabled) because inband commands are always enabled when Link Service is used.