Baudrate (BR) parameter


(see parameter description format info here)

Function:Overrides Baudrate (BR) setting
Parameter (P) cmd format:PBRx, where x: 0 (1200bps), 1 (2400bps), 2 (4800bps), 3 (9600bps), 4 (19200bps), 5 (38400bps), 6 (57600bps), 7 (115200bps), 8 (150bps), 9 (300bps), 10 (600bps), 11 (28800bps)
Possible replies:A, C, D, R
Relevance conditions:---
First introduced:Earlier than "baseline" V3.14/V3.51
See also:Serial port and serial communications


Baudrate parameter overrides the Baudrate (BR) setting .

Error (C) reply code is returned if the data supplied in the command is invalid. Denied (D) reply code is returned if:

On-the-fly Commands (RC) setting is 0 (disabled).
If no password or incorrect password is supplied while the On-the-fly Password (OP) setting is 1 (enabled) and the password is set (value of the Password (PW) setting is not <NULL>).

Rejected (R) reply code is returned if this command is sent while the DS is in the serial programming mode .