• Docs
    • Tibbo BASIC/C
    • Programmable Hardware
    • Serial-over-IP 

      

        
          
          
          
        
      

    

    

    
Tibbo
  • Introduction to Tibbo Modbus Gateways (MG)
    • Modbus Primer
    • Tibbo Modbus Gateway App
    • Tibbo Modbus Gateway Features
      • Ethernet, Wi-Fi, and Serial Ports
      • Slave ID-based Routing
      • TCP Port-based Routing
      • Slave ID Shifting
    • Supported Tibbo Hardware
      • TPS2(G2) and TPS3(G3)
        • Standard Configurations
          • TPS2(G2)-based Modbus Gateways
          • TPS3(G2)-based Modbus Gateways
        • Custom Configurations
        • Online Configurator
        • Forking Standard Configurations
      • DS1101 and DS1102
        • Serial Port Pin Assignments
        • Multi-Channel Serial Ports
  • Configuration
    • Using DS Manager
    • Using Web Interface
    • Available Settings
      • General Settings
      • Wi-Fi Settings
      • SNMP Settings
      • Serial Settings
      • TCP Slave Settings
      • Slave ID-based Routing Settings
      • Port-based Routing Settings
  • Status Indication and Monitoring
    • Understanding LED Signals
      • Main Status (Red and Green LEDs)
      • Wi-Fi Status (Blue LEDs)
    • Status Info on the Optional Display
  • Operation Monitoring
    • Configuration Monitoring Via SNMP Protocol
    • Data-level Monitoring Using IO Ninja
  • Upgrading the Modbus Gateway App
    • Warm Ethernet Upgrades Using DS Manager
    • Warm Ethernet Upgrades Using Device Explorer
    • Cold Ethernet Upgrades Using Device Explorer
    • Cold Serial Port Upgrades Using DS Manager
  • Update history
Configuration Monitoring Via SNMP Protocol
Tibbo Modbus Gateways support SNMP protocol V1 (with partial support of V2 commands). The parameter set conforms to SNMP V2. 
 Here is the screenshot of the  iReasoning MIB Browser window (http://ireasoning.com/mibbrowser.shtml ) showing SNMP parameters of our Modbus Gateway.
mib_browser