Link Service Login (TL) setting

Description

(see setting description format info here)

Function:Enables/disables Link Service login procedure after a TCP data connection is established
Set (S) command format:STLx, where x: 0 (disabled), 1 (enabled)
Get (G) command format:GTL
Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization
Post-initialization value:0 (disabled)
Change takes effect:After reboot
Overriding parameter:---
Relevance conditions:Current Transport Protocol (TP) [setting/parameter]= 1 (TCP)
First introduced:V3.24/3.54
See also:Ethernet port and network communications, Link Service

Details

This setting defines whether the DS will perform Link Service login procedure after a TCP data connection with another network host is established . For more information on Link Service see Link Server Documentation.

Link Service logins use the data from the following settings of the DS: Owner Name (ON) , Device Name (DN) , and Password (PW) setting ). The password is supplied in the encrypted form so Link Service logins are secure.

Link Server Login is irrelevant when Current Transport Protocol (TP) [setting /parameter ] = 0 (UDP) because UDP/IP cannot be used for communications with the Link Server.