PPPoE Login Name (PL) setting [V3.54+]

 Top  Previous  Next

 

Description (see setting description format info here)

 

Function:Defines login name for PPPoE Access Concentrator

 

Set (S) command format:SPLnn...n, where nn...n is login name (0-20 characters long)

 

Get (G) command format:GPL

 

Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization

 

Post-initialization value:<NULL>

 

Change takes effect:After reboot

 

Overriding parameter:---

 

Relevance conditions:PPPoE Mode (PP) setting= 1 (on connection) or 2 (on powerup)

 

First introduced:V3.54

 

See also:PPPoE

 

Details

 

This setting defines login name for PPPoE Access Concentrator. Login name can be up to 20 characters long.

 

This setting is irrelevant when PPPoE Mode (PP) setting is 0 (disabled).

 

Notice that PPPoE is only available in firmware V3.54+. This means that first-generation Devices (EM100-00/ -01/ -02, DS100-00/ -01/ -02) do not support PPPoE.