DS203 Serial Device Server

The DS203 is a Serial Device Server for external use. Device hardware includes one Auto-MDIX* 10/100BaseT Ethernet port, one RS232 serial port and an internal processor that "glues" network and serial sides together.

From the hardware standpoint, the DS203 can be viewed as a universal platform suitable for running a variety of network and serial communications-related applications. It is the application firmware, not hardware that gives the DS203 most of its functionality. The DS203 can run two distinctively different kinds of application firmware (version restrictions apply -- see below):

"Serial-to-Ethernet" firmware, currently in its 3rd generation ("Release3"), turns the DS203 into a ready-to-work serial-to-Ethernet converter that can connect almost any kind of serial device to the Ethernet (TCP/IP) network. This firmware has fixed functionality; you adjust the way the DS203 behaves by specifying the values of programmable parameters (settings) defined in this firmware.

The application firmware of the DS203 can be upgraded through the device's serial port or Ethernet port. Serial upgrades are facilitated by a so-called Monitor - a fixed "service" firmware inside the DS203. Network upgrades rely on the application firmware itself- there is a self upgrade algorithm that will be detailed later.

The DS203 is supplied with "serial device server" firmware pre-loaded. If you wish to receive the module with TiOS firmware, please specify option "P" device on your order. Alternatively, you can just load the TiOS firmware by yourself. Current firmware versions are posted on our website.

* Auto-MDIX means automatic detection of "straight" and "cross" cables.