pat. Object
The pat. object of TiOS running on Tibbo hardware "plays" signal patterns on the green status (SG) LED and red status (SR) LED (or I/O lines for connecting external SG and SR LEDs) provided on every Tibbo programmable hardware device. On some devices, the pat. object can work with up to four additional pairs of LEDs. Each LED pair is referred to as an "LED channel." All devices have at least one channel; some devices have up to five channels.
The pat. object of the TiOS Simulator plays signal patterns on two "virtual LEDs" found in the top left corner of the TiOS Simulator's window. Only one LED channel is available.
Differences from the "real" pat. object:
|
As there is only a single LED channel on the TiOS Simulator, keep the value of this property at 0. |
|
|
Manipulating this property is not necessary, as it is only needed for channels above channel #0. |
|
|
Manipulating this property is not necessary, as it is only needed for channels above channel #0. |
All other aspects of the TiOS Simulator's pat. object follow our "real" pat. object found on Tibbo devices.