Ordering Info and Specifications

Ordering Info

When an option is absent, the corresponding letter is removed, and the letter position is eliminated.

Specifications

• Processing unit and storage
• ARM Contex-M4 architecture + Wi-Fi 802.11a/b/g/n + BT4.2
• 192MHz clock frequency in active mode
• Powered by Tibbo OS (TiOS)
• Stores up to two compiled Tibbo BASIC/C binaries (apps)¹
• APP0 is for system-level configuration
• APP1 is the main OSS application
• 352KB SRAM
• 58KB SRAM for Tibbo BASIC/C variables and data
• 4MB flash for code storage
• System files and TiOS occupy a combined 2,408KB
• 1,688KB available for storing up to two app binaries¹
• Additional 4MB flash for the hardened fault-tolerant file system
• 2,048-byte EEPROM for configuration parameter storage
• RTC with programmable wake-up for scheduling active periods
• Secure cloud connectivity using TLS1.2 with RSA-2048
• Firmware and application update modes:
• Over-the-air (OTA) via BLE using the OSS Companion app
• Over-the-air from the cloud
• Application debugging (for developers):
• Via an internal serial port
• Via Wi-Fi interface
• Supervisory microcontroller
• Ultra-low power to maximize the battery life
• Capable of handling basic IO within the system
• Handles communications with the NFC interface
• Manages deep sleep and active states
• Firmware can be updated from the main processing unit
• Wi-Fi interface
• Supports 802.11a/b/g/n
• Internal high-gain antenna
• Supported frequencies:
• 2.4GHz (2,412MHz ~ 2,462MHz)
• 5.0GHz band 1 (5,180MHz ~ 5,240MHz) and band 4 (5,745MHz ~ 5,825MHz)
• Transmission distance: ~100m in open-space environments
• Security:
• WEP
• WPA-PSK
• WPA2-PSK (AES/TKIP)
• CAT-M1/NB-IoT (Cellular) interface ("C" models only)
• Supports global LTE CAT-M1, NB-IoT, 3G and 2G(GSM) bands:
• CAT-M: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28/B39
• NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28
• GSM: 850/900/1800/1900MHz
• Internal multi-band antenna
• Internal push-in/push-out slot for micro (3FF) SIM cards
• Internal USB port for updating the cellular module's firmware
• Bluetooth Low Energy (BLE) interface
• Supports BLE4.2
• 2.4GHz (2,402MHz ~ 2,480MHz)
• Transmission distance: ~15m in open-space environments
• Near Field Communications (NFC) interface
• NFC Forum Type 2 Tag compliant
• Powered by the smartphone's RF field to reduce internal current consumption
• Provides authentication for the OSS Companion app
• Four LEDs
• Green and red main status LEDs
• Yellow Wi-Fi access point association or BLE connection LED
• Blue LTE connection LED
• Power
• Battery power ("B" models)
• Non-rechargeable, 19Ah TLP-93311/A Tadiran battery
• Battery is field-replaceable
• Expected battery life:
• Up to 3 years of operation²
• Up to 5 years in sleep mode
• Coulomb counter-based battery power gauge
• Line-in power input ("L" and "M" models)
• Overrides battery power ("B" models)
• Two power entry options:
• Side power cable ("L" models)
• Modbus cable ("M" models)
• 12/24VDC nominal voltage (36VDC max.)
• Average power consumption:
• "W" models: 600mW
• "WC" models: 800mW
• 20/8us, 100V spike endurance
• Reverse polarity protection
• Auxiliary Power Port
• Overrides battery power ("B" models)
• Magnetic construction (compatible cable included)
• 5VDC nominal voltage
• Compatible with USB power banks and other USB power sources
• Average power consumption:
• "W" models: 600mW
• "WC" models: 800mW
• 20/8us, 12V spike endurance
• Reverse polarity protection
• Power outputs ("M" models only)
• Intended to power attached Modbus sensors
• Pass-through power output
• Derives power from the side power cable ("L" models)
• Output voltage equals the input voltage³
• Internal resettable fuse limits the output current to 1A
• 20/8us, 100V spike endurance
• Boosted power output
• Derives power from
• The battery ("B" models),
• Side power cable ("L" models), or
• Modbus cable ("M" models)
• Outputs 50mA@12VDC
• Software-controlled on/off switch for shutting off power when inactive
• Mechanical and Environmental:
• Dimensions (H x W x D): 262 x 65 x 93mm (with the skirt, excluding other accessories)
• Operating temperature range: –40°C to +85°C⁴
• Storage temperature range: –40°C to +85°C⁴
• IP rating:
• Modbus ("M") models: IP68, the entire device
• Internal sensor models: IP68, except for the sensor pod
• Internal sensors (sensor pods):
• Carry an ultra-low power microcontroller for sensor data aggregation and management
• Available models:
• -01: Temperature and relative humidity
• -02: Temperature, relative humidity, and carbon dioxide (CO2) up to 10000ppm
• Future sensor roadmap includes PM10, PM2.5, dB, and PPM sensors
• Modbus Pod ("M" models):
• Modbus RTU over RS485
• 100cm rodent-resistant, industrial-grade cable attached
• Internal waterproofing cable gland rated at IP68
• Standards compliance:
• Safety:
• IEC 62368-1 (LVD 2014/35/EU)
• EMC and immunity:
• FCC 15B Class B
• (BS) EN 55032
• (BS) EN IEC 61000-3-2
• (BS) EN 61000-3-3
• (BS) EN 55035
• (BS) EN 61000-4-2
• (BS) EN IEC 61000-4-3
• (BS) EN 61000-4-4
• (BS) EN 61000-4-5
• (BS) EN 61000-4-6
• (BS) EN 61000-4-8
• (BS) EN IEC 61000-4-11
• ETSI 301 489-1
• ETSI 301 489-17
• Wi-Fi:
• FCC 15C and 15E Class B
• EN 300 328 V2.2.2
• EN 301 893 V2.1.1
• EN IEC 62311
• BLE:
• FCC 15C and 15E Class B (FCC ID: XOJ-WS1102)
• EN300 328 V2.2.2
• EN IEC 62311
• Included accessories:
• Rain deflector skirt (protects onboard sensors)
• Plastic wall-mounting bracket with screws for installation on flat surfaces
• Pole mounting kit for 50mm (2") pipes
• Auxiliary power cable with magnetic and USB type A connectors

1. Although two independent Tibbo BASIC/C compiled binaries (apps) can be stored in the flash memory, only one app can run at a time.
2. Depending on the frequency of wake-ups, sensor readings, and uplinks.
3. Minus a small voltage drop across the internal protection circuitry.
4. Tested according to procedures I, II, and III of MIL-STD-810H Method 501.7 and MIL-STD-810H Method 502.7.