Ordering Info and Specifications

The GA1000 device is available in two configurations: GA1000 and GA1000L. Use the GA1000 version with all compatible products except the LTPP3 board, which requires the GA1000L.

A set consisting of the EM1000 and GA1000 modules can be ordered using the "EM1000G" ordering code (see Ordering Info and Specifications for the EM1000). Likewise, a set consisting of the EM2000 and GA1000 modules can be ordered as "EM2000G."

Specifications

Compatibility	GA1000: DS1101, DS1102, EM500, EM1000, EM1001, EM1206, EM2000, EM2001, TPP2, TPP2(G2), TPP3, TPP3(G2) GA1000L: LTPP3
Wireless interface	802.11b/g
Host interface type	SPI
Nominal power supply voltage (VCC pin)	DC 3.3V, ±5%
Operating current (VCC pin)	Post-reset, before boot: ~65mA Fully functional, no data transmission: ~200mA During data transmission: ~280mA
Operating temperature range	–20°C to +70°C
Operating relative humidity	10% to 90%
Mechanical dimensions (excl. leads)	42 x 19 x 6.7mm
Packaging	Tray, 30 modules/tray

All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this manual, and does not make any commitment to update the information contained herein.

Think the above table should contain additional data? Do not just assume that you know the answer — talk to Tibbo! Remember that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our customer.