Ordering Info and Specifications

The numbering scheme for DS10x0, DS10x2, and DS10x3 devices is as follows:

An illustration of the numbering scheme for DS10x0, DS10x2, and DS10x3 devices.

DS101x devices without the "G," "C," or "GC" options are not being offered by Tibbo. If you want to purchase an Ethernet-only device (i.e., without any wireless options), then order a DS100x instead.


External Antenna

The DS1010, DS1012, and DS1013 can be ordered with Wi-Fi and/or GPRS. The Wi-Fi interface works better when equipped with an antenna. In the absence of Wi-Fi antenna, the Wi-Fi interface still works (relying on a small "chip" antenna on the GA1000), but the operating range is reduced. The GPRS interface can't work without the antenna at all. Therefore:


Hardware Specifications

Network side

DS1000, DS1002, and DS1003: NB1000 + LB1000

DS1010, DS1012, and DS1013: NB1000 + LB1000

Interface side

DS1000 and DS1010: IB1000 + LB1001

DS1002 and DS1012: IB1002 + LB1001

DS1003 and DS1013: IB1003 + LB1001

Supply voltage range

DC 10VDC ~ 18VDC (12VDC nominal)

Operating temperature

–30°C to +80°C

Operating relative humidity

10% ~ 90%

Mechanical dimensions

91x104x99mm

Carton dimensions

203x160x110mm

All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this manual, and does not make any commitment to update the information contained herein.


Think the above table should contain additional data? Do not just assume that you know the answer — talk to Tibbo! Remember that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our customer.


Ordering Info and Specifications

External Antenna

Hardware Specifications