Ser.Parity Property
Function: |
Sets/returns parity mode for the selected serial port (selection is made through ser.num) |
Type: |
Enum (pl_ser_parity, byte) |
Value Range: |
0- PL_SER_PR_NONE: no parity bit to be transmitted. 1- PL_SER_PR_EVEN: even parity. 2- PL_SER_PR_ODD: odd parity. 3- PL_SER_PR_MARK: parity bit always at "1". 4- PL_SER_PR_SPACE: parity bit always at "0".
|
See Also: |
Details
Mark parity is equivalent to having a second stop-bit (there is no separate property to explicitly select the number of stop bits).
This property is only relevant when the serial port is in the UART mode (ser.mode= 0- PL_SER_MODE_UART).
WRITE ABOUT LIMITATION ON THE 7-BIT, NO PARITY MODE FOR ARM.