TEV-IBx Boards
The TEV-IBx are interface boards. Two boards are currently supplied by Tibbo:
- TEV-IB0: RS232/422/485 serial port board (each EM1000-TEV system has two of them);
- TEV-IB1: 3 x opto-input/ 3 x relay output board (each EM1000-TEV system has two of them). Opto-inputs can optionally be used to connected a Wiegand or clock/data reader.
TEV-IBx Board Connector
The TEV-IBx boards are connected to the TEV-MB0 motherboard through a 2x10-pin connector. Each two pins of the connector are combined together for better electrical contact. Therefore, the connector effectively has 10 lines.
Each EM1000-TEV system has four interface boards and each board is controlled through one of the four serial ports of the EM1000 module.

Pin # |
Port 1 |
Port 2 |
Port 3 |
Port 4 |
1 |
VIN (12V) |
|||
2 |
5V |
|||
3 |
3.3V |
|||
4 |
GND |
|||
5 |
GPIO8/RX0* |
GPIO10/RX1* |
GPIO12/RX2* |
GPIO14/RX3* |
6 |
GPIO9/TX0* |
GPIO11/TX1* |
GPIO13/TX2* |
GPIO15/TX3* |
7 |
GPIO16/INT0/CTS0* |
GPIO17/INT1/CTS1* |
GPIO18/INT2/CTS2* |
GPIO19/INT3/CTS3* |
8 |
GPIO0/RTS0* |
GPIO1/RTS1* |
GPIO2/RTS2* |
GPIO3/RTS3* |
9 |
GPIO20/INT4/DSR0* |
GPIO21/INT5/DSR1* |
GPIO22/INT6/DSR2* |
GPIO23/INT7/DSR3* |
10 |
GPIO4/DTR0* |
GPIO5/DTR1* |
GPIO6/DTR2* |
GPIO7/DTR3* |
- I/O pins of the EM1000 module. Not all pin functions are shown. See EM1000 documentation for full description.