Ordering Info and Specifications

Device numbering scheme is as follows:

DS1206 numbering system

Visit our online store for the up-to-date list of accessories offered with the DS1206.

Examples of valid model numbers

Model number



DS1206 device with 512KBytes of flash memory


DS1206 device with 1MB of flash memory

Hardware specifications

Ethernet interface

10/100BaseT Ethernet, Auto-MDIX

Serial ports

One RS232 port (DB9M) with 3.5 serial channels (four inputs and three outputs)

UART capabilities

Baudrates up to 921'600bps; none/even/odd/mark/space parity and 7/8 bits/character.

Clock frequency

11.0592MHz with PLL off

88.4736MHz with PLL on

Flash memory

512KBytes or 1024KBytes, entire memory minus 64KB is available to store Tibbo BASIC/C application and data.

Typical write endurance is 100'000 write cycles per 256-byte sector. See the warning in Flash and EEPROM Memory.

EEPROM memory

2048 bytes, 2020 bytes available to store application data.

Typical write endurance is around 1'000'000 write cycles per 16-byte EEPROM sector. See Prolonging and Estimating EEPROM life.

Supply voltage range

DC 10-24V (12V nominal)

Operating temperature

-5 to +70 degrees C

Operating relative humidity


Mechanical dimensions


Carton dimensions


Gross weight


All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this Manual, and does not make any commitment to update the information contained herein.

Think the above table should contain additional data? Do not just assume that you know the answer — talk to Tibbo! Remember that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our Customer.