Available Tibbits
#00-1, M1S: Four Direct I/O lines
#00-2, M1S: Three direct I/O lines and ground
#00-3, M1S: Two direct I/O lines, +5V power, ground
#01, M1S: Four-line RS232 port [SER, INT]
#02, M2S: RS232/422/485 port [SER, INT]
#03-1, M1S: Two low-power relays (configuration 1)
#03-2, M1S: Two low-power relays (configuration 2)
#04-1, M1S: Two isolated inputs
#04-2, M1S: Three isolated inputs, common (-)
#04-3, M1S: Three isolated inputs, common (+)
#04-4, M1S: Four opto-inputs, common ground
#04-5, M1S: Two 24V isolated inputs
#04-6, M1S: Three 24V isolated inputs, common (-)
#04-7, M1S: Three 24V isolated inputs, common (+)
#04-8, M1S: Four 24V opto-inputs, common ground
#05, M1S: RS485 port
#06, M2T: Two high-power relays
#07, M1S: Two solid state relays
#08, M1S: Wiegand and clock/data reader port [INT]
#09, M1S: Low-power 5V supply, 12V input
#10, M1T: Medium-power 5V supply, 12V input
#11, M1S: Four open collector outputs
#12, M1S: Low-power +15/-15V power supply
#13, M1S: Four-channel ADC
#14, M1S: Four-channel DAC
#15, H1S: High-voltage AC solid state relay
#16, M1S: Three PWMs with OC outputs
#17, M1S: Three PWMs with power outputs
#18, C1: Power input
#19, C2: DB9 connector
#20, C2: Nine terminal blocks
#21, C1: Four terminal blocks
#22, M1S: RTD temperature meter
#23, M2T: Isolated PoE [POE] (can be used as generic isolated power supply with 48V input)
#25, M2T: High-power 5V supply, 24V/48V input
#26, M1S: IR command processor
#27, C1: IR receiver/transmitter
#28, C1: Ambient light sensor
#29, C1: Ambient temperature meter
#30, C1: Ambient humidity/temperature meter
#31, M1S: PIC coprocessor
#33, M1T: Wide Input Range Power Supply
#35, C1:Barometric pressure sensor
#36, C1: 3-axis accelerometer
#37, C1: RF connector
#38, C1: Pushbutton
#39-1~4, C1: Large LED (four colors)
#40-1~4, M1S: Digital potentiometer (four nominals)
#41, C1: 8-bit port
#42, M1S: RTC and NVRAM with backup
#43-1, M1S: Four-Channel Streaming ADC ±10V
#43-2, M1S: Four-Channel Streaming ADC ±100V
#44-1, H2: Isolated RS232/422/485 port (DB9M connector)
#44-2, H2: Isolated RS232/422/485 port (terminal blocks)
#45-1~3, H2: LTE (4G) Modem
#46, H2: Cat-M1/NB-IoT Modem
#47, H2: GPRS modem
#48, H2: Audio in/out [AUD] [DEPRECATED]
#49, C2: Micro SD card slot [MMC] [DEPRECATED]
#50, C1: Mini Type B USB port [USB] [DEPRECATED]
#51, M1S: CAN bus [CAN] [DEPRECATED]
#52, M2T: Four-channel isolated +/-10V ADC
#53, M2T: Isolated 4-20mA ADC
#54, M1S: Four dry contact inputs
#56, C1: Type A USB port [USB] [DEPRECATED]
#57, M1S: FPGA Tibbit
#58, M1S: Two 24V NPN isolated open collector outputs