LB100x Board Dimensions
LB100x LED boards accommodate up to 11 LEDs. What LEDs are actually installed depends on the board version. LB100x boards connect either to an NB10x0 network board or IB100x interface board. The LC1000 flat cable is used for this.
LB100x boards can be mounted independently or attached to an "NB" or "IB" board. A custom-made "brass offset" part (BP1000) is used in the latter case. The BP1000 ensures a precise 3.5mm gap between the LB100x and the "NB" or IB" board.
|
W |
Aver. |
25.0 |
Board width |
|
H |
Aver. |
75.0 |
Board height |
|
T |
Aver. |
1.6 |
Board thickness |
|
m1 |
Aver. |
3.7 |
Distance to the board mounting hole |
|
m2 |
Aver. |
50.3 |
Distance between board mounting holes |
|
m3 |
Aver. |
3.0 |
Distance to the board mounting hole |
|
m4 |
Aver. |
24.6 |
Distance from the board mounting hole to the LED edge |
|
m5 |
Max. |
12.5 |
Distance from the LED edge to the center of the first LED |
|
m6 |
Aver. |
5.0 |
Distance between LEDs |
|
m7 |
Aver. |
2.6 |
Distance from the board surface to the LED center |
|
m8 |
Max. |
6.5 |
LED height with respect to the board surface |
|
G |
Aver. |
3.5 |
Gap between the LB100x and the bottom side of the NB10x0 (IB100x) |
|
d |
Max. |
3.0 |
LED diameter |
Dimensions are for reference only. Tibbo assumes no responsibility for any errors in this manual, and does not make any commitment to update the information contained herein.