LED Control

The IB1000/2/3 works with the standard LB1001 LED board and controls the LEDs through eight general-purpose I/O (GPIO) lines of the EM1000 module installed on the  NB10x0 network board. To turn an LED on, set the corresponding line LOW. Do not forget to configure LED control lines as outputs. This is done through the io.enabled property of the io. object.

LED #, color (LB1001)

Corresponding EM1000 I/O line

IC1000 cable line

#8, red

GPIO24

46

#7, green

GPIO25

44

#6, red

GPIO26

42

#5, green

GPIO27

40

#4, red

GPIO28

38

#3, green

GPIO29

36

#2, red

GPIO30

34

#1, green

GPIO31

32