Power Arrangement

All DS/WS110x devices can be powered through the power jack.

The power jack accepts "small" power connectors with a 3.5mm diameter. Use the APR-P0011, APR-P0012, or APR-P0013 power adapters supplied by Tibbo or a similar adapter with a 12VDC nominal output voltage. The adapter's current rating should be at least 500mA. On the power jack, the ground is "on the outside," as shown in the figure below.

Note: The WS1102 is compliant with the IEC/EN 62368-1 safety standard in the –40°C to +85°C range. To maintain this compliance in the field, use an external DC power source outputting 0.5A @ 9VDC~18VDC (less than 15W) that is also IEC/EN 62368-1 certified and can operate in the –40°C to +85°C range.

A diagram of a 3.5mm power jack.

There are also "alternative" ways of powering the devices listed below. Click the links below to explore: