Upload button has a fly-out menu:
| • | Load Firmware Through the Network: Upload new firmware, optionally with compiled Tibbo BASIC application binary attached, through the Ethernet interface. This can be simultaneously applied to a group of devices. |
| • | Load Application Through the Network: Upload compiled Tibbo BASIC application through the Ethernet interface. This can be simultaneously applied to a group of devices. |
| • | Load Firmware Through the Serial Port (X-modem): Upload firmware, optionally with compiled application binary attached, through the serial port of the device. For this to work, the device must be in the firmware upload mode. |
| • | Load Firmware Through the Debug Serial Port: No publicly released Tibbo devices currently support this function. |
| • | Load Application Through the Debug Serial Port: No publicly released Tibbo devices currently support this function. |
Loading firmware vs. loading application
"Load firmware" functions allow you to load the following:
| • | Firmware for "traditional" fixed-function serial-over-IP devices such as DS203. |
| • | Firmware for TiOS devices. |
| • | Firmware for TiOS devices combined with the compiled Tibbo BASIC application binary. This is a single file that in fact contains two parts. |
"Load Application" function allows you to load compiled Tibbo BASIC application binary into TiOS devices.