A Code Snippet

Top  Previous  Next

Here is an example of the initialization code for the SCAP library. The code assigns a static IP address. Of course, you can also use a DHCP library for dymamic configuration of your device's IP.

 

 

sub on_sys_init()

 net.ip="192.168.1.200"        '<======== SET A SUITABLE IP ADDRESS

 

 if scap_start()<>EN_SCAP_STATUS_OK then

         sys.debugprint("Could not allocate the necessary number of sockets")

         sys.halt

 end if

 

 ...

end sub