.Enabled Property

Top  Previous  Next

Function:

Specifies whether the display panel is enabled.

Type:

Enum (no_yes, byte)

Value Range:

0- NO: Disabled (default).

1- YES: Enabled.

See Also:

Preparing the Display for Operation

 


Details

Several properties — lcd.iomapping, lcd.width, lcd.height, lcd.inverted, lcd.rotated — can only be changed when the display panel is disabled.

When you set this property to 1- YES, the controller of the panel is initialized and enabled. This will only work if your display is properly connected, correct display type is selected in your project, lcd.iomapping is set property, and necessary I/O lines are configured as outputs. The lcd.error R/O property will indicate 1- YES if there was a problem enabling the display.

Setting the property to 0- NO disables the controller/panel.