.Lockupdelay Property

Top  Previous  Next

Function:

Defines (in 10ms increments) the amount of time any key will have to stay pressed for the keypad to enter the "lockup" state.

Type:

Byte

Value Range:

0-65535. Default= 1000 (10 sec).

See Also:

Key States and Transitions, Preparing the Keypad for Operation

 


Details

Lockup is not a key state, it is the state of the keypad as a whole. Once the lockup condition is detected the keypad is disabled (kp.enabled= 0- NO).

This property can only be changed when the keypad is disabled (kp.enabled= 0- NO). Setting the property to 0 means that the keypad will never enter the "lockup" state.