.Checksum Method

Top  Previous  Next


Calculates and writes into the RAM buffer, or verifies the checksum for the data in the currently selected RAM buffer of the flash memory (selection is made through the fd.buffernum property).


fd.checksum(mode as pl_fd_csum_mode, byref csum as word) as ok_ng


0- OK: Completed successfully (always the case when the mode= 1- PL_FD_CSUM_MODE_CALCULATE).

1- NG : The checksum was found to be invalid (can only be generated when the mode= 0- PL_FD_CSUM_MODE_VERIFY).

Also returns the calculation result indirectly, through the csum argument.

See Also:

Using Checksums, Direct Sector Access,

fd.buffernum, fd.getbuffer, fd.setbuffer, fd.getsector, fd.setsector, fd.copyfirmware, fd.copyfirmwarelzo





0- PL_FD_CSUM_MODE_VERIFY: verify the checksum.

1- PL_FD_CSUM_MODE_CALCULATE: calculate the checksum and store it into the selected RAM buffer.


Indirectly returns calculated value. When the mode= 0- PL_FD_CSUM_MODE_VERIFY, this value returned will be 0 if the checksum was found to be correct, or some other value if the checksum was found to be wrong. When the mode= 1- PL_FD_CSUM_MODE_CALCULATE, the method will return a newly calculated checksum and store the same checksum into the RAM buffer.