VSP Configuration (<vsp> Section)

Top  Previous  Next

 

VSP configuration options define individual functioning parameters for each VSP. Each VSP has to be described in the following format (purple marks default values that will be used if corresponding parameter is omitted):

 

   <!-- -------------------- VSP0 CONFIGURATION -------------------- -->

 

   <!-- VSP number -->

   <vsp num="0">

 

       <!-- HOST AND PORT TO BIND -->

       <bind host="ip_address" port="port"/>

 

       <!-- Connection parameters -->

       <connection [rmode="client|server|server/client"] [proto="udp|tcp"] [conmode="ondata|immediately"]

       [timeout="timeout(5)"] [onthefly="outofband|inband|disabled"] [clogin="pwd"] [dlogin="pwd"] />

 

       <!-- Destination device parameters -->

       <destination ip="IP_address"|mac="MAC_address" [port="port(1001)"] [cport="cport(65535)"] />

 

       <!-- Outbound packet generation options -->

       <packets [maxlen="len(255)"] [maxdelay="delay(0)"] [starton="any|char"] [startchar="hex"] [stopchar="hex"] />

 

       <!-- Event logging configuration for this VSP -->

       [<log type="syslog|pipe|file" level="EMR|ALR|CRT|ERR|WRN|NTC|INF|DBG" path="path"/>]

       ...

       ...

       [<log type="syslog|pipe|file" level="EMR|ALR|CRT|ERR|WRN|NTC|INF|DBG" path="path"/>]

 

       <!-- Data dump section -->

       [<dump port="no|yes" path="path"/>]

 

   </vsp>

   <!-- -------------------- END OF VSP0 CONFIGURATION -------------------- -->

 

Click on the links above to jump to parameter group and individual parameter description topics.