On-the-fly Commands (RC) setting

 Top  Previous  Next

 

Description (see setting description format info here)

 

Function:Enables or disables on-the-fly command processing by the DS

 

Set (S) command format:SRCx, where x: 0 (disabled), 1 (enabled)

 

Get (G) command format:GRC

 

Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization

 

Post-initialization value:0 (disabled)

 

Change takes effect:After reboot

 

Overriding parameter:---

 

Relevance conditions:---

 

First introduced:Earlier than "baseline" V3.14/V3.51

 

See also:Serial port and serial communications, Authentication,  On-the-fly (network-side) Parameters and instructions

 

Details

 

When On-the-fly Commands setting is 1 (enabled) the DS will accept on-the-fly commands (network-side parameters and instructions) from the network host. When On-the-fly Commands setting is 0 (disabled) the DS will reject on-the-fly commands from the host (Denied (D) reply code will be returned).

 

On-the-fly commands do not require prior authentication through Login (L) command. Password protection specifically for on-the-fly commands can be enabled through the On-the-fly Password (OP) setting.

 

On-the-fly commands provide a way of remotely controlling the serial port of the DS, hence, the name of this setting- "Remote Control".