Inband Commands (IB) setting

Top  Previous  Next

 

Description (see setting description format info here)

 

Function:Enables or disables inband (TCP) programming

 

Set (S) command format:SIBx, where x: 0 (disabled), 1 (enabled)

 

Get (G) command format:GIB

 

Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization

 

Post-initialization value:0 (disabled)

 

Change takes effect:After reboot

 

Overriding parameter:---

 

Relevance conditions:Current Transport Protocol (TP) [setting/ parameter]= 1 (TCP) AND

       current Link Service Login (TL) [setting/parameter]= 0 (disabled)

 

First introduced:Earlier than "baseline" V3.14/V3.51

 

See also:Inband (TCP) commands

 


Details

 

Inband Commands setting defines whether inband (TCP) programming is enabled or disabled.

 

This Setting is irrelevant when the current Transport Protocol (TP) [setting/ parameter] is 0 (UDP) because inband command passing is only possible when TCP/IP is used for data connections between the network host and the DS.

 

Inband Commands setting is also irrelevant when current Link Service Login (TL) [setting/parameter]= 1 (enabled) because inband commands are always enabled when Link Service is used.