Serial Settings

Top  Previous  Next

 

Serial settings define operation of the serial port of the DS. For more information see serial port and serial communications.

 

The following settings belong to this group:

 

Setting

Description

Serial Interface (SI) setting

Selects full-duplex or half-duplex mode for the serial port of the DS

Flow Control (FC) setting

Enables or disables hardware (RTS/CTS) flow control for the serial port of the DS

DTR Mode (DT) setting

Defines the function of the DTR line of the serial port of the DS

DTR Startup Mode (DS) setting

[V3.27/V3.57+]

Defines the startup mode of the DTR line (High or Low)

Baudrate (BR) setting

Defines the baudrate of the serial port of the DS

Parity (PR) setting

Defines the parity mode of the serial port of the DS

Bits Per Byte (BB) setting

Defines the bits/byte mode of the serial port of the DS

Soft Entry (SE) setting

Disables or enabled serial programming mode entry through escape sequence and selects escape sequence type

 

Escape Character (EC) setting

[V3.24/3.54+]

Defines ASCII code of character used in escape sequence

On-the-fly Commands (RC) setting

Enables or disables on-the-fly command processing by the DS

On-the-fly Password (OP) setting

Enables or disables password protection for on-the-fly commands

Notification Bitmask (NB) setting

Defines which I/O lines of the DS are monitored for changes