Escape Character (EC) setting

Top  Previous  Next


Description (see setting description format info here)


Function:Defines ASCII code of character used in escape sequence 


Set (S) command format:SECccc, where ccc is the ASCII code of escape character


Get (G) command format:GEC


Init (I) command effect:Initialized unconditionally, through network command, serial command, or quick initialization


Post-initialization value:1


Change takes effect:After reboot or exiting the serial programming mode


Overriding parameter:---


Relevance conditions:Soft Entry (SE) setting= 1 (type 1) or 2 (type 2)


First introduced:V3.24/3.54


See also:Serial programming




This setting defines the ASCII code of character used in escape sequence. Which escape sequence, if any, is used is defined by the Soft Entry (SE) setting.   


Escape Character is irrelevant when the  Soft Entry (SE) setting is 0 (disabled).