Parity (PR) parameter

 Top  Previous  Next

 

Description (see parameter description format info here)

 

Function:Overrides Parity (PR) setting

 

Parameter (P) cmd format:PPRx, where x: 0 (off), 1 (even), 2 (odd), 3 (mark), 4 (space)

 

Possible replies:A, C, D, R

 

Relevance conditions:---

 

First introduced:Earlier than "baseline" V3.14/V3.51

 

See also:Serial port and serial communications

 

Details

 

Parity parameter overrides the Parity (PR) setting.

 

Error (C) reply code is returned if the data supplied in the command is invalid. Denied (D) reply code is returned if:

 

•On-the-fly Commands (RC) setting is 0 (disabled).

 

•If no password or incorrect password is supplied while the On-the-fly Password (OP) setting is 1 (enabled) and the password is set (value of the Password (PW) setting is not <NULL>).

 

Rejected (R) reply code is returned if this command is sent while the DS is in the serial programming mode.