Notification Bitmask (NB) parameter

Description

(see parameter description format info here)

Function:Overrides Notification Bitmask (NB) setting
Parameter (P) cmd format:PNBbbb, where bbb is a "collection" of bit flags each of which disables (when 0) or enables (when 1) status change monitoring for a specific I/O line of the DS. Allowable value range is 0-255
Possible replies:A, C, D, R
Relevance conditions:---
First introduced:Earlier than "baseline" V3.14/V3.51
See also:Serial port and serial communications

Details

Notification Bitmask parameter overrides the Notification Bitmask (NB) setting . See Notification Bitmask (NB) setting for the bit position assignment within the bbb value.

Error (C) reply code is returned if the data supplied in the command is invalid. Denied (D) reply code is returned if:

•On-the-fly Commands (RC) setting is 0 (disabled).
•If no password or incorrect password is supplied while the On-the-fly Password (OP) setting is 1 (enabled) and the password is set (value of the Password (PW) setting is not <NULL>).

Rejected (R) reply code is returned if this command is sent while the DS is in the serial programming mode .