Parameters for the Serial Port of the DS #2

Top  Previous  Next

 

On this step you select communication parameters for the serial port of the DS #2.

 

cw_3_serial_port2

 

Unlike with the VSP-to-DS link, the serial port parameters of the DS, involved in the DS-to-DS link, cannot be adjusted via on-the-fly commands. You have to define fixed parameters that will be used by this DS at all times.

 

If you have previously enabled status exchange for the RTS/CTS signal pair then the RTS/CTS flow control option will be pre-set and fixed at disabled or remote. This is because the remote exchange and "local" flow control are mutually exclusive options.