IMPORTANT NOTE: The RJ1202 is a companion Ethernet connector. It is only available for purchase in combination with any suitable Tibbo module. We do not sell the RJ1202 separately. There are professional manufacturers that offer a wide variety of connector products, and it is not our aim to become one of them. The RJ1202 was designed primarily to facilitate upgrades from the EM202 to the EM1202 module.
The face dimensions of the RJ1202 match those of the EM202 exactly. If you already have a housing with an opening for the EM202 you can replace the EM202 with the RJ1202 without making any housing modifications. In combination, the EM1202 and RJ1202 take up the same amount of space on the PCB as the EM202. PCB re-layout is necessary but it is simple and the EM1202 and RJ1202 are guaranteed to fit in the space previously occupied by the EM202. More information on upgrading from the EM202 is available in the Upgrading From the EM202 topic.
Features:
| • | Very compact dimensions (15.5x19x15.5mm). |
| • | Face dimensions match those of the EM202. This facilitates easy upgrades from the EM202 to a combination of the RJ1202 and an Ethernet module, such as the EM1202. |
| • | Standard RJ45 socket built-in. |
| • | 100BaseT Ethernet Magnetics onboard (YCL PH163112A). |
| • | Four internal status LEDs (Green, Red, Green, Yellow). Each line has a 220 Ohm series resistor. |
| • | Can be used with any Tibbo module except the EM202 (the latter has its own RJ45 socket). |