#04-3, M1S: Three Isolated Inputs, Common (+)
|Top Previous Next|
Function: Three optically isolated inputs with common (+). Inputs are fully isolated from system ground.
Form factor: M1S
Category: Input module
Special needs: ---
Power requirements: 5V/35mA
If no external resistor is added these inputs activate at about 2V. Forward current should not exceed 10mA, and this caps the maximum input voltage at around 5V. Add external resistors if you need to apply higher input voltage.
There are three green LEDs which are connected to three control lines. LEDs light up for the LOW state of control lines (i.e. when current passes through the diodes of the opto-couples).