The TEV-LBx boards carry display panels. Three boards are currently supplied by Tibbo:
| • | TEV-LB0: carries 128x64, black/white WINSTAR WG12864F LCD panel (SAMSUNG S6B0108 controller). |
| • | TEV-LB1: carries 128x96, 4-bit RITDISPLAY RGS13128096 OLED panel (SOLOMON SSD1329 controller). |
| • | TEV-LB2: carries 176x220 AMPIRE AM176220 TFT panel (HIMAX HX8309 controller). |
You can choose what display board will be installed on your EM1000-TEV. See Ordering Info for details.
TEV-LBx Board Connector
The TEV-LBx boards are connected to the TEV-MB0 motherboard through a 2x20-pin connector. Each two pins of the connector are combined together for better electrical contact. Therefore, the connector effectively has 20 lines.
Pin # |
Function |
1 |
VIN (12V) |
2 |
5V |
3 |
3.3V |
4 |
GND |
5 |
GPIO48* |
6 |
GPIO47* |
7 |
GPIO46* |
8 |
GPIO39/P4.7* |
9 |
GPIO38/P4.6* |
10 |
GPIO37/P4.5* |
11 |
GPIO36/P4.4* |
12 |
GPIO35/P4.3* |
13 |
GPIO34/P4.2* |
14 |
GPIO33/P4.1* |
15 |
GPIO32/P4.0* |
16 |
GPIO44* |
17 |
GPIO43* |
18 |
GPIO42* |
19 |
GPIO41* |
20 |
GPIO40* |
* I/O pins of the EM1000 module