TEV-IBx Boards

Top  Previous  Next

The TEV-IBx are interface boards. Two boards are currently supplied by Tibbo:

TEV-IB0: RS232/422/485 serial port board (each EM1000-TEV system has two of them);

TEV-IB1: 3 x opto-input/ 3 x relay output board (each EM1000-TEV system has two of them). Opto-inputs can optionally be used to connected a Wiegand or clock/data reader.

TEV-IBx Board Connector

The TEV-IBx boards are connected to the TEV-MB0 motherboard through a 2x10-pin connector. Each two pins of the connector are combined together for better electrical contact. Therefore, the connector effectively has 10 lines.

Each EM1000-TEV system has four interface boards and each board is controlled through one of the four serial ports of the EM1000 module.

 

TEV-IBx

 

Pin #

Port 1

Port 2

Port 3

Port 4

1

VIN (12V)

2

5V

3

3.3V

4

GND

5

GPIO8/RX0*

GPIO10/RX1*

GPIO12/RX2*

GPIO14/RX3*

6

GPIO9/TX0*

GPIO11/TX1*

GPIO13/TX2*

GPIO15/TX3*

7

GPIO16/INT0/CTS0*

GPIO17/INT1/CTS1*

GPIO18/INT2/CTS2*

GPIO19/INT3/CTS3*

8

GPIO0/RTS0*

GPIO1/RTS1*

GPIO2/RTS2*

GPIO3/RTS3*

9

GPIO20/INT4/DSR0*

GPIO21/INT5/DSR1*

GPIO22/INT6/DSR2*

GPIO23/INT7/DSR3*

10

GPIO4/DTR0*

GPIO5/DTR1*

GPIO6/DTR2*

GPIO7/DTR3*

* I/O pins of the EM1000 module. Not all pin functions are shown. See EM1000 documentation for full description.