L |
Max. |
34.4 |
Length |
W |
Max. |
20.0 |
Width |
H |
Max. |
15.5 |
Height |
l |
Min. |
4.0 |
Connector pin length |
w1 |
Max. |
19.0 |
Width at the face excluding mounting stands |
w2 |
Max. |
18.1 |
Board width |
M |
Min. |
1.9 |
Mounting stand and tail height |
t1 |
Aver. |
2.5 |
Mounting stand diameter |
t2 |
Aver. |
1.5 |
Solder tail width |
t3 |
Aver. |
0.25 |
Solder tail thickness |
p |
Aver. |
1.27 |
Connector pin pitch |
s1 |
Aver. |
33.1 |
Distance from the face to the connector pins of the main connector |
s2 |
Aver. |
22.2 |
Distance from the connector pins of the main connector to the vertical centerline of solder tails |
s3 |
Aver. |
26.25 |
Distance from the connector pins of the main connector to the vertical centerline of mounting stands |
s4 |
Aver. |
28.35 |
Distance from the connector pins of the main connector to the connector pins of the additional connector |
h1 |
Aver. |
17.5 |
Distance between the horizontal centerlines of mounting stands |
h2 |
Aver. |
18.5 |
Distance between the horizontal centerlines of solder tails |
Dimensions are for reference only. Tibbo assumes no responsibility for any errors which may appear in this Manual, and does not make any commitment to update the information contained herein.