Mechanical Dimensions

Top  Previous  Next

EM1202EV_mech_dim

 

L

Max.

52.6

Board length

W

Max.

38.0

Board width

l

Aver.

2.6

Distance from the front edge of the PCB to the front surface of the RJ45 jack, power jack, setup button

H

Max.

17.2

Board height with components installed on the top side of the board

t

Aver.

1.6

PCB thickness

d1

Aver.

3.6

Mounting hole diameter

d2

Aver.

5.0

LED diameter (these LEDs are present on the EM1202EV-RS only)

d3

Max.

3.5

Setup button diameter

m1

Aver.

26.0

Horizontal distance between the mounting holes (first pair)

m2

Aver.

31.0

Horizontal distance between the mounting holes (second pair)

m3

Aver.

14.0

Distance from the front edge of the PCB to the first pair mounting holes

m4

Aver.

45.0

Distance from the front edge of the PCB to the second pair of mounting holes

n1

Aver.

11.0

PCB outline dimension

n2

Aver.

29.0

PCB outline dimension

n3

Aver.

40.5

Distance from the front edge of the PCB to the LEDs (present on the EM1202EV-RS only)

n4

Aver.

47.0

Distance from the front edge of the PCB to the horizontal centerline of the TTL interface connector (present on the EM1202EV-TM and "-TS" only)

n5

Aver.

50.1

PCB outline dimension

n6

Aver.

33.0

PCB outline dimension

n7

Aver.

9.0

Horizontal distance between LEDs (present on the EM1202EV-RS only)

n8

Aver.

15.0

Distance from the vertical centerline of the PCB to the vertical centerline of the power jack (present on the EM1202EV-RS and "-TM" only)

n9

Max.

5.1

Power jack width (the power jack is present on the EM1202EV-RS and "-TM" only)

n10

Aver.

14.5

Distance from the vertical centerline of the PCB to the vertical centerline of the setup button

h1

Max.

7.5

Power jack height (the power jack is present on the EM1202EV-RS and "-TM" only)

h2

Aver.

5.5

Distance from the bottom surface of the PCB to the center of the setup button

h3

Max.

2.5

Height of the tallest component on the bottom side of the PCB

h4

Aver.

6.2

Distance from the bottom surface of the PCB to the centerline of the DB9M connector (present on the EM1202EV-RS only)

p

Aver.

2.0

TTL connector pin pitch (connector present on the EM1202EV-TM and "-TS" only)

 

Dimensions are for reference only. Tibbo assumes no responsibility for any errors in this Manual, and does not make any commitment to update the information contained herein.