The EM1000-TEV has several versions available. The numbering scheme is as follows:
The following is included into each EM1000-TEV:
| • | The TEV-MB0 board with the EM1000-512K-ST or EM1000-1024K-ST module (see EM1000 Ordering Info for details). |
| • | Additionally, the WA1000 Wi-Fi module and antenna are installed if option "W" is specified. |
| • | The TEV-KB0 keypad board. |
| • | The TEV-LBx display board of your choice. |
| • | Two TEV-IB0 boards, installed on ports 1 and 2. |
| • | Two TEV-IB1 boards, installed on ports 3 and 4. |
| • | Two TB100 terminal block adaptors. |
| • | One 12V/1A power adaptor. |
| • | One WAS-1499 "straight" Ethernet cable. Good for crossover connections as well, since the EM1000 supports Auto-MDIX. |
| • | One WAS-P0005(B) serial cable. Can be used for firmware upgrades through the serial port. |
Additionally, any board or accessory from the EM1000-TEV system can be purchased separately.
Examples of valid model numbers
Model number |
Description |
EM1000-TEV-512K-L0 |
EM1000-TEV with the "512K" EM1000 module and the TEV-LB0 display board |
EM1000-1024K-W-L2 |
EM1000-TEV with the "1024K" EM1000 module, the WA1000 Wi-Fi slave module and antenna, and the TEV-LB2 display board |