Ordering Info

Top  Previous  Next

The EM1000-TEV has several versions available. The numbering scheme is as follows:

 

EM1000-TEV numbering system

 

The following is included into each EM1000-TEV:

The TEV-MB0 board with the EM1000-512K-ST or EM1000-1024K-ST module (see EM1000 Ordering Info for details).

Additionally, the GA1000 Wi-Fi module and antenna are installed if option "G" is specified.

The TEV-KB0 keypad board.

The TEV-LBx display board of your choice.

Two TEV-IB0 boards, installed on ports 1 and 2.

Two TEV-IB1 boards, installed on ports 3 and 4.

Two TB100 terminal block adaptors.

One 12V/1A power adaptor.

One WAS-1499 "straight" Ethernet cable. Good for crossover connections as well, since the EM1000 supports Auto-MDIX.

One WAS-P0005(B) serial cable. Can be used for firmware upgrades through the serial port.

 

Additionally, any board or accessory from the EM1000-TEV system can be purchased separately.

Examples of valid model numbers

 

Model number

Description

EM1000-TEV-512K-L0

EM1000-TEV with the "512K" EM1000 module and the TEV-LB0 display board

EM1000-TEV-1024K-G-L2

EM1000-TEV with the "1024K" EM1000 module, the GA1000 Wi-Fi slave module and antenna, and the TEV-LB2 display board