DS1102

Top  Previous  Next

The DS1102 can be powered through its power jack or the optional PoE module (letter "P" in the model numbering scheme).

The PoE module is supposed to be powered by 48V (nominal), which is standard for PoE equipment. Your PoE-enabled hub will take care of this. The PoE module outputs 12VDC.

Internally, both power sources are connected to the DS1102's power regulator through two diodes, as shown on the diagram below.

 

ds1102_power

 

Note that the DS110x devices cannot accommodate the PoE and Wi-Fi options at the same time.