Ordering Info and Specifications

Top  Previous  Next

Device numbering scheme is as follows:

 

DS10x5 numbering system

 

DS1015 devices without "G", "C", or "GC" options are not being offered by Tibbo. If you want to purchase Ethernet-only device (without any wireless options), then order DS1005 instead.

External Antenna

The DS1015 can be ordered with Wi-Fi, GPRS, or Wi-Fi and GPRS options. The Wi-Fi interface works better when equipped with an antenna. In the absence of Wi-Fi antenna, the Wi-Fi interface still works (relying on a small "chip" antenna on the GA1000), but the operating range is reduced. The GPRS interface can't work without the antenna at all. Therefore:

The DS1015G device (with Wi-Fi option) will be shipped with Wi-Fi antenna.

The DS1015C device (with GPRS option) will be shipped with GPRS antenna.

The DS1015GC device (with Wi-Fi and GPRS options) will be shipped with GPRS antenna. The Wi-Fi interface will rely on the internal "chip" antenna and, therefore, will have reduced range compared to the DS1015G.

 

Hardware specifications

Network side

DS1005: NB1000 + LB1000

DS1015: NB1000 + LB1000

Interface side

IB1005 + SB1005 + LB1001

Supply voltage range

DC 10-18VDC (12VDC nominal)

Operating temperature

-30 to +80 degrees C

Operating relative humidity

10-90%

Mechanical dimensions

91x104x99mm

Carton dimensions

203x160x110mm

 

All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this Manual, and does not make any commitment to update the information contained herein.

 

Think the above table should contain additional data? Do not just assume that you know the answer — talk to Tibbo! Remember that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our Customer.