DS10x5 (Digital I/O)

Top  Previous  Next

ds1005_front

 

The DS10x5  BASIC-programmable controllers feature eight opto-isolated digital inputs, six high-power relays, and one RS232/485 port.  The DS1005 is based on the NB1000 network board (Ethernet interface only), and the DS1015 is based on the NB1010 network board (Ethernet + optional Wi-Fi + optional GPRS).

 

note_warning-wt

Read carefully the explanation about the type of antenna installed when the DS1015 is ordered with Wi-Fi, GPRS, or Wi-Fi and GPRS options.

 

Follow these quick links to often needed information:

Right (network) side of the device:

 - Power jack, terminals, and power regulator;

 - Ethernet jack;

 - Ethernet LEDs, M (mode) and R (reset) buttons;

 - "Right side" LEDs;

 - Buzzer control;

 - Optional Wi-Fi interface (DS1015 devices only);

 - Optional GPRS interface (DS1015 devices only).

Left (interface) side of the device:

 - Terminal blocks and control lines;

 - Opto-isolated inputs;

 - Relays;

 - RS232/485 port;

 - "Left side" LEDs.