DS10x4 (Analog I/O)

Top  Previous  Next

ds1004_front

The DS10x4  BASIC-programmable controllers feature eight A/D inputs, four D/A outputs with both voltage and current outputs, two low-power relays, and one RS232/485 port. The DS1004 is based on the NB1000 network board (Ethernet interface only), and the DS1014 is based on the NB1010 network board (Ethernet + optional Wi-Fi + optional GPRS).

 

note_warning-wt

Read carefully the explanation about the type of antenna installed when the DS1014 is ordered with Wi-Fi, GPRS, or Wi-Fi and GPRS options.

 

Follow these quick links to often needed information:

Right (network) side of the device:

 - Power jack, terminals, and power regulator;

 - Ethernet jack;

 - Ethernet LEDs, M (mode) and R (reset) buttons;

 - "Right side" LEDs;

 - Buzzer control;

 - Optional Wi-Fi interface (DS1014 devices only);

 - Optional GPRS interface (DS1014 devices only).

Left (interface) side of the device:

 - Terminal blocks and control lines;

 - A/D converter;

 - D/A converter;

 - Relays;

 - RS232/485 port;

 - "Left side" LEDs.